Safety

OMP 3 Point Harness - Black

OMP Safety Harness One 2In Endurance Red Pull Down - (Fia 8853-2016)

OMP Safety Harness First 2In Red (Fia 8853-2016) Pull Up - Steel Adj

The TAKATA Drift II Snap On Street belts are manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt...

The TAKATA Drift II belts are manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt laws. The belt...

The TAKATA Drift II belts are manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt laws. The belt...

If you want the look and feel of a full racing harness, but still need to stay "Street Legal", the DRIFT III is the belt you need with its 3" wide racing shoulder belts. The TAKATA Drift III belts are manufactured in accordance to the European Standard...

If you want the look and feel of a full racing harness, but still need to stay "Street Legal", the DRIFT III is the belt you need with its 3" wide racing shoulder belts. The TAKATA Drift III snap-on belt is manufactured in accordance to the European...

If you want the look and feel of a full racing harness, but still need to stay "Street Legal", the DRIFT III is the belt you need with its 3" wide racing shoulder belts. The TAKATA Drift III snap-on belt is manufactured in accordance to the European...

The TAKATA Drift II Snap On Street belts are manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt...

If you want the look and feel of a full racing harness, but still need to stay "Street Legal", the DRIFT III is the belt you need with its 3" wide racing shoulder belts. The TAKATA Drift III belts are manufactured in accordance to the European Standard...

The TAKATA shoulder belt pads feature a Dinamica black ultra suede fabric outer material with memory foam padding and a 100% polyester inner cover material. The pads install over existing OEM 3-point belts using a zipper on one side. Once installed the...

The TAKATA shoulder belt pads feature a Dinamica ultra suede fabric outer material with memory foam padding and a 100% polyester inner cover material. The pads install over existing OEM 3-point belts using a zipper on one side. Once installed the result...

The TAKATA Eye Bolts are designed to work perfectly with the B14 Snap On Brackets. This bolt has a 7/16" Thread Size & 22mm Thread Length.

When secured for driver safety, the high density foam with Velcro closure provides effective padding to increase driver comfort when using racing gear.

Whenever a bolt or eye-bolt is used to attach a harness to your vehicle, you should use these wavy washers. One on each side of the sheet metal. They will help keep the bolt from backing out. These are not needed when using the machined sleeve/washer...

Reinforcing a harness mounting point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the...

The TAKATA shoulder belt pads feature a Dinamica ultra suede fabric outer material with memory foam padding and a 100% polyester inner cover material. The pads install over any 3" shoulder belt from TAKATA using a zipper on one side and have extra...

Reinforcing a harness mounting point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the...

The TAKATA Eye Bolts are designed to work perfectly with the B14 Snap On Brackets. This bolt has a 7/16" Thread Size & 38mm Thread Length.

The TAKATA bracket kit should be used in conjunction with the Snap-On end fittings on Takata Harnesses. Use these brackets to bolt into a hard to reach place in your car, then snap the harness on to it. The brackets are designed to be bent up to 90° in...

The B24 is the most economical bolt-in bracket offered. It is a heavy-duty Steel bracket that cannot be bent to aid installation. Dimensions are 5mm thick, 69x46mm with a 13mm (1/2") bolt hole. There is a slight 10° bend so that this bracket can be...

Reinforcing a harness mounting point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the...

The RACE 4 is the benchmark harness for Track Day / Drift / Show cars. This true racing harness comes with FIA approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include asm system to prevent submarining,...

TAKATA Standard 3 Bar Slide for 2" webbing. Uses the simple 3 Bar Slide wrapping technique. Most commonly used for HANS specific shoulder belts or anti-sub straps. If you are running in an SFI 16.5 series, you need the LV11NC.

The TAKATA green Tow Strap features a bendable stainless steel tab that can be bolted on using 7/16" / 12mm bolt (not included). The strap is a universal design and is capable of puling over 4000 lbs.

The TAKATA Black Tow Strap features a bendable stainless steel tab that can be bolted on using 7/16" / 12mm bolt (not included). The strap is a universal design and is capable of puling over 4000 lbs.

The TAKATA 3 Bar Slide is designed to be used to wrap any 3" webbing to a harness bar, or to wrap any end fitting into a 3" piece of webbing. This is the bracket found on all 3" shoulder belts. Uses the simple 3 Bar Wrapping technique. If you are in an...

The RACE 4 is the benchmark harness for Track Day / Drift / Show cars. This true racing harness comes with FIA approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include asm system to prevent submarining,...

The TAKATA MPH 4 Point harness belts are made by TAKATA Racing in Japan and feature the finest Japanese hardware and TAKATA green herringbone webbing. Leading professional drivers from Formula 1, Formula Nippon, IndyCar, depend on Takata MPH belts. The...