Engine Builds

IAG 550 EJ25 2.5L SUBARU SHORT BLOCK window.SHOGUN_IMAGE_ELEMENTS = window.SHOGUN_IMAGE_ELEMENTS || new Array(); window.SHOGUN_IMAGE_ELEMENTS.push({ uuid: 's-c96c5173-3a93-4dd2-a22b-1463d6a5535d' }) ...

IAG 750 EJ20 2.0L SUBARU SHORT BLOCK window...

IAG 750 EJ25 2.5L SUBARU SHORT BLOCK window...

IAG 950 EJ25 2.5L SUBARU SHORT BLOCK window...

IAG 950 EJ20 2.0L SUBARU SHORT BLOCK window...

IAG 1150 EJ25 2.5L SUBARU SHORT BLOCK window...

IAG / Crest CNC Stage X Billet Aluminum EJ25 Subaru Short Block The CNC Billet Aluminum EJ case seeks to change the Subaru performance tuning market by reinventing the EJ and addressing virtually every weakness that exists in max-power builds. Each IAG /...

IAG 600 FA20 DIT 2.0L SUBARU SHORT BLOCK window...

IAG 600 FA20 FT86/BRZ 2.0L SUBARU SHORT BLOCK WITH 12.5:1 STANDARD COMPRESSION window...

IAG 600 FA20 FT86/BRZ 2.0L SUBARU SHORT BLOCK WITH 10.5:1 LOW COMPRESSION ...

IAG 800 FA20 DIT 2.0L SUBARU SHORT BLOCK window...

IAG 800 FA20 FT86/BRZ 2.0L SUBARU SHORT BLOCK WITH 12.5:1 STANDARD COMPRESSION window...

IAG 800 FA20 FT86/BRZ 2.0L SUBARU SHORT BLOCK WITH 10.5:1 LOW COMPRESSION window...

IAG 550 LONG BLOCK ENGINE WITH IAG 550 HEADS FOR 02-14 WRX, 04-21 STI, 04-13 FXT, 05-09 LGT ...

IAG 750 LONG BLOCK ENGINE WITH IAG 750 HEADS FOR 02-14 WRX, 04-21 STI, 04-13 FXT, 05-09 LGT ...

IAG 950 LONG BLOCK ENGINE WITH IAG 950 HEADS FOR 02-14 WRX, 04-21 STI, 04-13 FXT, 05-09 LGT ...

IAG 1150 LONG BLOCK ENGINE WITH IAG 1150 HEADS FOR 02-14 WRX, 04-21 STI, 04-13 FXT, 05-09 LGT window...

IAG 800 FA20F DIT TIMED LONG BLOCK FOR 2015-2021 WRX window.SHOGUN_IMAGE_ELEMENTS =...

IAG 600 FA20F DIT TIMED LONG BLOCK FOR 2015-2021 WRX window.SHOGUN_IMAGE_ELEMENTS =...

The IAG Long Block Engine Basic Installation Kits provide all of the basic components needed to install one of our EJ25 Long Block Engine Packages in one complete kit. All fluids for initial break-in are included. Just select the kit which fits your year...

The IAG Long Block Engine Basic Installation Kits provide all of the basic components needed to install one of our FA20F DIT WRX Long Block Engine Packages in one complete kit. All fluids for initial break-in are included. Components Included: (x2)...

After years of research and development testing, the IAG Performance Fire-Lock™ head gasket is the newest solution to preventing head gasket failure on high horsepower and high boost Subaru EJ25 engines. This solution is loosely derived from diesel...

The IAG Performance Fire-Lock head gasket solution was created after years of research and development testing to prevent head gasket failure on high horsepower and high boost Subaru EJ Series engines. This solution is loosely derived from diesel...

The IAG Performance Cooper ring head gasket is manufactured from an asbestos-free composite raw material and features silicone based beading applied to critical areas to improve sealing around all water and oil passages. What sets this gasket apart from...

The IAG Performance Cooper ring head gasket is manufactured from an asbestos-free composite raw material and features silicone based beading applied to critical areas to improve sealing around all water and oil passages. What sets this gasket apart from...

The IAG Copper O-Ring Wire & Install Tool Kit is intended for use with our case halves or short blocks. The kit includes (4) lengths of copper o-ring wire and a wooden tool handle end intended to press the o-ring wire into the machined groove without...

The IAG Performance 1/2 Inch Head Stud Set is manufactured by ARP and is designed for use on high horsepower Subaru EJ25, FA20, and FA20 DIT engines. Due to the larger size of the head studs, a greater load can be placed on the fasteners and in turn it...

IAG's / ARP 14mm Head Stud Set is designed for use on high horsepower Subaru engines. The larger size of the stud increases its load capacity which in turn helps to prevent the cylinder head from lifting and creating head gasket failures. The oversized...

The IAG Performance 14mm Head Stud Dowel is specifically designed to work our 14mm ARP head studs and machined cases. Subaru short blocks or cases that are machined for 14mm head studs will require (x2) dowels per side or (x4) dowels total. Dowels are...

The IAG ARP 14mm Head Stud Nut is intended to directly replace (1) of the nuts included with our 14mm Head Stud Set with part number: IAG-ENG-1711. The nuts are sold individually, (x12) are required for (1) engine or (x6) per cylinder head.  PDF...