SuperPro

This kit replaces the forward differential mount bushings - known as the pinion mount bushings. The OEM units are soft rubber and break down fairly quickly with that wear accelerated the harder they...

Upgrade your car with SuperPro for enhanced performance, better alignment and increased service life.SuperPro is the leading aftermarket suspension bushing manufacturer with 40+ years of experience...

SuperPro Bushings are the perfect suspension upgrade or replacement solution! Lifetime Warranty Enhances your vehicles handling and performance Unaffected by extreme temperatures, oils, water or...

The OEM differential mount bushing has been identified as having a low service life. SuperPro has developed a part that is easy to install, with a high service life and delivers zero cabin noise.

Rear Differential-to-Subframe Mount Bushing Kit This kit replaces the rearward differential mount bushings that attach the differential to the rear subframe. The OEM units are soft rubber and break...

Rear Differential Support Bracket Mount Bushing Kit The OEM differential mount bushing has been identified as having a low service life.SuperPro has developed a part that is easy to install, with a...

The TRC3205 Pitch Stop Mount features a blue anodized billet aluminum body with SuperPro's high resiliency polyurethane bushings which limit fore and aft engine movement while minimizing NVH (Noise,...

Suspension subframes form the connection between the suspension and the vehicle's body and passenger compartment. These are one of the key areas vehicle manufacturers use to tune the passenger...

SuperPro's transmission cross-member mount replaces the soft rubber OE isolator with upgraded firmer bushings, resulting in less gearbox movement which greatly enhances shifter feel and accuracy...

SuperPro's adjustable camber rear upper control arm bushing set features offset crush tubes for camber adjustment at the inner mounting position of the rear upper control arm. This is the ideal kit...

The SuperPro rear trailing arm bushing set complements the SuperPro SPF1491K at the front of the arm and allows for more consistent toe settings under load providing better rear grip and traction...

If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer! By being adjustable the Sway bar rates can be increased between 30-50% over OE...

The Ultimate handling package! Fitting larger sway bars, has two main effects, vehicle balance in terms of understeer and oversteer, and increased roll resistance. Both of these effects provide...

The SuperPro Roll Control two position adjustable front sway bar is 26mm solid and the rear is a three position adjustable 24mm solid sway bar. Add in the SuperPro Adjustable sway bar links to:...

If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer! By being adjustable the Sway bar rates can be increased between 30-50% over OE...

SuperPro's solid heavy duty adjustable front sway bar for the features 2-position adjustment, factory fitment, and SuperPro's three stage coating for a long-lasting finish no matter what the seasons...

SuperPro's heavy duty adjustable solid 26mm front sway bar for the 2015-21 Subaru WRX features a two position adjustment to tailor the balance of the car. The sway bar also has SuperPro's three stage...

SuperPro's solid heavy duty 22mm adjustable rear sway bar features 3-position adjustment, factory fitment, and SuperPro's three stage coating for a long-lasting finish no matter what the seasons...

SuperPro's solid heavy duty 24mm adjustable rear sway bar features 3-position adjustment, factory fitment and SuperPro's three stage coating for a long-lasting finish no matter what the seasons throw...

SuperPro's rear sway bar mount reinforcement brace distributes the load generated by larger sway bars across additional mounting points removing any potential twist, deflection and related fatigue...

TRC1035 features an adjustable length of 65mm-70mm (2.6" - 2.8") and 10mm ball joint studs Length is measured from the center of one ball joint stud to the center of the other. Designed to maximize...

TRC12160 features an adjustable length of 210mm-260mm (8.25" - 10.25") and 12mm ball joint studs Length is measured from the center of one ball joint stud to the center of the other. Designed to...

TRC1225 features an adjustable length of 75mm-85mm (3.0" - 3.35") and 12mm ball joint studs Length is measured from the center of one ball joint stud to the center of the other. Designed to maximize...

TRC1025 features an adjustable length of 75mm-85mm (3.0" - 3.35") and 10mm ball joint studs Length is measured from the center of one ball joint stud to the center of the other. Designed to maximize...

SuperPro 2022+ Subaru WRX Front HD Adjustable End Link Set (12mm Studs 254mm-305mm) - TRC12200

SuperPro 2022+ Subaru WRX Front HD Adjustable End Link Set (12mm Studs 300mm-345mm) - TRC12245

SuperPro's Heavy Duty Non-Adjustable endlinks are stronger and more rigid than stock which allows your sway bar to work more effectively by removing the flex and deflection of the factory end links...

Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.Features & Benefits: 6060-T5 Alloy Link Ball for low friction and long...

SPF4396-24K is the upgrade replacement for the OEM sway bar size on the 2015-2021 Subaru WRX and WRX STI - if you want to retain the front sway bar but remove the flex and deflection from the OEM...

SuperPro's SPF4396-27K is the replacement mount bushing for SuperPro's RC0050FZ-26 WRX front bar or RC0099FZ-26 WRX STI bar - the 26mm SuperPro bar requires a 1mm larger bushing to compensate for the...