IAG Stage 2.5 International Hybrid EJ25 Subaru Closed Deck Short Block (For Use w/ EJ20 Heads)
- Usually Ships in 2 to 3 Weeks
- Proposition 65:
- P65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
IAG Stage 2.5 International Hybrid EJ25 Subaru Closed Deck Short Block (For Use w/ EJ20 Heads)
IAG Stage 2.5 International Hybrid Subaru EJ25 Closed Deck Short Block
The Hybrid EJ25 Short Block is designed for enthusiasts that want to increase the displacement and low end torque of their vehicle that originally was equipped with the EJ20 2.0L engine. The Hybrid 2.5L features pistons that are designed to lower compression and match the EJ20 cylinder heads without the need for cylinder head chamber modification.
Each IAG Stage 2.5L Hybrid starts with brand new Subaru 2.5L engine case halves. IAG machines the case halves assembled together in our Haas VF-4SS CNC mill to accept the IAG CLOSED Deck Inserts that transform the block into a solid deck. The unique inserts feature small passages that allow needed coolant flow to the deck surface. Next, the short block is Deck Plate bored and honed to 99.75mm in our in-house Sunnen SV-30 the most advanced automotive cylinder hone available. IAG's in-house honing process is able to set custom piston to wall clearances to best fit your needs. The modified case halves are then assembled using a new 2017+ Subaru 2.5L nitride treated STI crankshaft that is matched to ACL or King race main bearings. IAG-Spec Tuff H-Beam connecting rods and ARP rod bolts are utilized along with ACL or King race rod bearings. The case halves are sealed with new OEM main/case bolts and sealant (upgrading to ARP mains requires line honing). Finally, IAG-Spec 99.75mm JE FSR 2618 Forged Pistons with .210" Steel Wrist Pins are added to finish the Stage 2.5 short block.
Stage 2.5 Closed Deck Includes:
- Case Halves - Converted to Closed Deck using brand new Subaru OEM case halves, bored and honed to 99.75mm.
- Pistons - IAG-Spec JE FSR 99.75mm 2618 Forged Pistons, Ring Set, .210" Steel Wrist Pins, Clips, (Perfect Skirt Coating and Offset Wrist Pins)
- Connecting Rods - IAG-Spec Tuff H-Beam / ARP2000 Rod Bolts.
- Rod / Main Bearings - ACL or King Race bearings.
- Crankshaft - Standard New Subaru Nitride Treated 2017+ STI Crankshaft.
- Case / Main Bolts - Standard FHI Subaru case bolts.
Additional Options Available:
- Oil Pump - Subaru JDM 12mm High Volume Oil Pump or 11mm Subaru Oil Pump
- IAG Oil Pan Packages - Upgraded 2.5L Oil Pan, oil pickup, baffle and windage tray *Requires use of 2.5L dipstick sold separately.
- Hardware / Seal Option - (Wrist pin plugs, washers, separator cover, bolts, etc. In case you don't want to transfer from the original engine).
Power: The IAG Stage 2.5 Short Block has a power output rating of 700BHP.
*All IAG short blocks are balanced and blueprinted.
Compression Ratio: 8.5:1 on S20 Cylinder Heads
Oil Pickup & Pan Packages:
IAG offers a number of oil pickup, pan, baffle and windage tray options to help you complete your engine build. When completing a Hybrid build it is important to note that switching to our oil pickup requires the use of a EJ25 oil pan and dipstick.
About the V2 Oil Pickup:
It's well-known that the OEM oil pickups often crack and fail which in most cases destroys your engine from lack of oil pressure. To avoid the cracking failures seen in the OEM oil pickup tubes, IAG’s oil pickup is manufactured from heavy-gauge steel tubing that is 2x thicker than OEM. It features a machined 3/8" stainless steel flange, which mates to the block with a Viton O-ring. The integrated heavy-duty stainless steel mounting bracket uses two mounting points rather than the OEM single mounting point. Furthermore, the oil pickup features a formed bottom with an OEM style mesh screen for proper filtration. The TIG-welded oil pickup increased material thickness matched with the two-point heavy-duty mounting bracket helps ensure it does not fatigue and fail over time like an OEM unit.
The IAG V2 Oil Pickup is available separately or in one of two types of packages. The first package bundles the pickup with our windage tray and oil control baffle, enabling you to utilize a EJ25 pan of your liking. The second package includes our V2 Oil Pickup along with a Street or Competition Series Baffle and Windage Tray combined with our new Oil Pan.
About The Pans:
IAG's cast aluminum and CNC machined oil pans suit a wide range of street and track applications with fitment for a larger variety of popular headers in mind, while still increasing oil capacity up to 30% over OEM.
The pans incorporate cooling fins to dissipate heat from the oil as air passes over them. The included oil drain plug is integrated into the lower cooling fins at the absolute bottom of the pan to ensure all the waste oil is removed during maintenance changes. The pan is also threaded with 1/8th inch NPT port to accept many popular oil temperature sensors. 1/8th inch NPT plug is also included in the event that the sensor port is not used.
The upper flange mounting surface is CNC machined for better hardware fitment and features a sealing O-ring for easier installation and removal. Furthermore, the pan is designed to use the included OEM style Viton dipstick o-rings with a unique chamfer to aid in the installation of the dipstick.
About Street Series Oil Baffle
Internally, the pan includes our integrated, stainless steel, Street Series Oil Baffle that is designed to prevent oil inside the pan from sloshing around and creating cavitation, which can lead to oil starvation. The baffle is engineered to be removable for future upgrades and easy cleaning.
About Competition Series Oil Baffle
The IAG Competition Series Oil Baffle is designed to limit potential blow-by and prevent oil starvation in your Subaru's WRX / STI EJ engine during high rpm and high g-force driving. The Competition Series Baffle should be used in vehicles that will see track time, however, it is acceptable to run this baffle on the street as well. The Comp Series baffle is configured with Viton one-way flapper valves which hold oil in the area closest to the pickup. Combining the baffle with the louvers in our windage tray, oil is prevented from reentering the upper crankcase area and is directed down into the oil pan to ensure plentiful supply to the oil pickup.
About The Windage Tray:
The job of the windage tray is to help direct oil from the upper crankcase down into the lower crankcase and oil pan area. Manufactured from stainless steel, precision-formed louvers direct oil downwards and help to prevent oil that is draining from the cylinder heads in the lower crankcase area from sloshing upwards into the path of the crankshaft and connecting rods, thus reducing aeration.
Hardware / Seal Option:
Not planning on reusing your original short block service plugs and covers? IAG offers a simple comprehensive cover and seal kit that includes (1) Rear main seal, (3) OEM wrist pin plugs, (3) OEM wrist pin plug washers, (1) OEM separator cover, (6) OEM separator cover bolts, (1) OEM wrist pin service cover, (1) OEM wrist pin service cover O-ring and (2) OEM wrist pin service cover screws. *If you are reusing your original wrist pin service plugs and covers always replace the (3) OEM wrist pin plug washers and (1) wrist pin service cover O-ring before installing a short block to avoid potential leaks. *Never reuse a rear main seal on a new short block.
Please review the PDF document below regarding installation, break-in procedures and warranty information.
PDF After Sale Document - Contains Shipping, Engine Care and Warranty Information
Model Year & Fitment
- 2002 Subaru WRX
- 2003 Subaru WRX
- 2004 Subaru WRX
- 2005 Subaru WRX
SHIPPINGFREE SHIPPING on orders of $250 or more* Simply look for the logo to enjoy free shipping on selected items throughout the store. Oversized packages and freight shipments do not qualify for free shipping. If the items in your order which qualify for 'Free Shipping' total $250 or more, your order ships FREE! Free shipping is only available to the continental United States also referred to as the “lower 48 states”.
Shipping Policy: All products sold on the shopping cart are shipped by UPS or USPS. All packages include shipping insurance in case they are lost or damaged. USPS requires signature confirmation on all insured orders over $200.00. USPS shipping times are estimated and not guaranteed. UPS tracking numbers are automatically generated when a package ships and the number is sent to the email address you provided. If a package contents is damaged during shipping please notify the shipping driver and file a claim with the shipper. You have 14 days to inspect your shipment and contents. After that period of time, IAG is no longer responsible for missing items. You have 30 days to report any damaged or incorrect items, after that period of time IAG is no longer responsible for returns or exchanges. You can contact us by Email or call 410-840-3555 for assistance. *International orders are subject to customs charges, duties or fees. Please check with your local customs office before ordering. IAG is not responsible for international customs charges, duties or brokerage fees.
Drop Shipping: Some items require drop shipping to complete an order. These products are shipped from manufacturer or distributor warehouses across the country. In some cases, this may speed up delivery time. In other cases, it could add 1-3 days to the delivery time. If you have a question regarding an order please contact our sales desk at 410-840-3555.
Order Processing: Orders placed after 3PM EST may not be processed the same day. Order processing may take 24-48 hours. USPS orders placed after 10am EST will ship the following business day if the items are in stock
How do I return an item?
You have 14 days to inspect your shipment and contents. After that period, IAG is no longer responsible for missing items. You have 30 days to report any damaged or incorrect items, after that period IAG is no longer responsible for returns or exchanges. All stocking products are subject to a 30 Day return policy. The item(s), when approved for return, are subject to a 20 percent restocking fee. Canceled orders may be subject to a 20 percent cancellation fee. All product returns require a return authorization number before being shipped back to IAG or the manufacturer. An “RMA” number is obtained by calling the IAG Support Desk at 410-840-3555 or emailing email@example.com. Some products may require shipping back to the manufacturer for inspection before a return or exchange may be processed. Some products may not be able to be returned. Products that have been modified or installed are not eligible for return. There are no returns or cancellations for Special Order/Made to Order items and Electrical Components (including the COBB Accessport). Items returned after the 30 Day return period without an RMA will be refused. Canceled service appointments with deposits are non-refundable.
Refunds take 30 days or less. Payments made by Credit Card or PayPal are returned back to the original account used during the transaction. There are no cash returns; we will issue a business check for the return of funds. Refunds are decided by the management and not by sales staff. Canceled service appointments with deposits are non-refundable.
IAG Performance Product Warranty (Excluding - Short Blocks / Long Blocks)
This limited warranty gives you specific legal rights and you may also have other rights, which vary from state to state. We limit the duration and remedies of all implied warranties, including, without limitation, the warranties of merchantability and fitness for a particular purpose to the duration of this express limited warranty. Some states do not allow limitations on how long an implied warranty lasts. The remedies described below are your sole and exclusive remedies and our entire liability for any breach of this limited warranty. Our liability shall under no circumstances exceed the actual amount paid by you for the product, nor shall we under any circumstances be liable for any consequential, incidental, special or punitive damages or losses, whether direct or indirect.
This warranty covers defects in materials and workmanship of your IAG Performance Product for 12 Months or 12,000 Miles from the date of receipt.
IAG will repair any IAG Manufactured Product that proves to be defective in materials or workmanship within the warranty period. If a repair is not possible, we will either replace your Product with a new Product of similar composition and price, or refund the full purchase price of your Product, at our sole discretion. There is no charge for inspection but the buyer is responsible for shipping charges.
IAG Performance Engine Warranty
For more information concerning our engine warranty please visit IAG Performance Engine Warranty Page
Other Manufacturer Products:
Products not manufactured by IAG are subject to the individual manufacturer warranties which may apply. If you have questions concerning the fitment, appearance, or performance of your item, please contact a member of our customer support team for assistance.
Our customer service team is happy to assist you with the products purchased from IAG Performance. Our support associates can help you with installation support, troubleshooting advice, and help to identify possible manufacturer defects.
For products that are found to have defects, our support department can provide the contact information for the manufacturer to arrange a warranty inspection and, if applicable, any necessary repairs or replacement shipments.
You may also contact the manufacturer directly for information regarding product eligibility and specific terms and conditions of warranty coverage.
Customers Also Viewed