Tools

Installing parts is always easier when you have the right tools. This heat-treated aluminum -6 AN hose end wrench will make installing your COBB Fuel Rails and Lines a breeze and prevent marring. The anodized aluminum wrench is great in tight quarters...

The ACT AT90 Clutch Alignment Tool is designed to aid the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with the transmission input shaft.

The Company23 AVCS Intake Cam Sprocket Tool allows for removal of the AVCS intake cam sprockets without damaging the cam or the sprocket. The tools sprocket specific interface will not round out internal pulley splines like other designs. The 3-piece...

The Company23 AVCS Security Socket is a 5-sided security socket enabling proper assembly/disassembly of the AVCS cam sprockets. The tool allows for cleaning and flushing of the AVCS cam sprocket internal passages. Cleaning the AVCS cam sprockets prevents...

The Company23 Camlock Tool locks the left hand side cam sprockets from turning when the timing belt is removed. The tool prevents cam sprockets from spinning when the belt is removed and eliminates potential valve damage. The tool easily installs on all...

The Company23 Crankshaft Socket slips on over the crank snout enabling an engine builder to rotate a complete engine with any ½" ratchet or breaker bar. Designed to easy locate TDC when replacing timing belts or other engine work. The low profile height...

The Company23 Dual AVCS Exhaust Cam Sprocket Tool allows for removal of the Dual AVCS exhaust cam sprockets without damaging the cam or sprocket. The sprocket specific interface will not round out internal pulley splines like other designs. Featuring...

The Company23 Fuel Line Disconnect Tool features a unique profile specifically designed for Subaru fuel quick couplers. The tool will not damage fuel line seals like universal fuel line tools. The tool will not damage fuel lines like aluminum disconnect...

The Company23 Piston Ring Compressor for Subaru EJ25 engines features a gradual billet taper design that precisely guides the piston into the bore. The tool will not damage piston or rings. The tool has an adjustable diameter enabling one tool to work on...

The Company23 V2 Crank Pulley Tool features an integrated low profile handle which allows you to easily remove your crank pulley with the radiator still in the car. The Version 2 design upgraded the small pin reinforcement ring to help free the toughest...

The Company23 Valve Spring Compressor is custom designed to perfectly fit Subaru engines. The tool compresses valve springs with the head on the bench or on the engine in the car. The tool allows for easy replacement of valve stem seals, valves, springs,...