Sensors

IAG Performance Universal Intake Air Temperature (IAT) Speed Density Kit. Kit includes weld on IAT aluminum bung, IAT sensor, IAT sensor connector and wiring.

IAG 3" ALUMINUM MAF MOUNTING FLANGE FOR 2002-07 SUBARU WRX, 2004-07 STI

The IAG MAF (Mass Air Flow Sensor) mounting flange is manufactured from aluminum and is designed to be welded onto a custom 3" aluminum pipe. The flange easily accepts the OEM MAF and o-ring. *Note this a part that requires fabrication and welding to use...

DESCRIPTION The NexGen Flex Fuel Module is mounted to the passenger side strut tower and handles all of the data processing before sending ethanol content to the ECU to be used by an Accessport-delivered NexGen Flex Fuel calibration. Tying your existing...

DESCRIPTION This plug and play NexGen Ethanol Sensor Kit is the heart of our NexGen Flex Fuel product offering. It consists of an ethanol content sensor with mounting bracket, fuel lines to be used with the COBB Fuel Lines, a NexGen Flex Fuel module, and...

NTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful...

OverviewAEM's Bosch 4.2LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM wideband air/fuel UEGO controllers.These...

NTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful...

OverviewAEM's wideband O2 UEGO AFR replacement sensor and stainless-steel, finned, stand-off bung kit includes only a replacement Bosch 4.2 LSU Wideband UEGO sensor and stainless steel tall manifold bung. It is designed for installation and use with the...

OverviewAEM's Bosch 4.2LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM wideband air/fuel UEGO controllers.These...

Omni Power USA 3 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially...

Omni Power USA 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially...

Omni Power USA 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially...

Don't limit your tuning options to Speed Density only. Utilize our Hybrid Harness for the best of both worlds! Tuner Adaptability While on the DynoEvery project is unique, so giving your tuner as many tools as possible to tune your vehicle will ensure...

Don't limit your tuning options to Speed Density only. Utilize our Hybrid Harness for the best of both worlds! Tuner Adaptability While on the DynoEvery project is unique, so giving your tuner as many tools as possible to tune your vehicle will ensure...

With just two connector clicks, you'll be ready to tune your car on Speed Density with iWire's plug-and-play harness! What the Heck is Speed Density, and Why Did my Tuner Recommend it?Speed density quite simply is another way to estimate how much air is...

With just two connector clicks, you'll be ready to tune your car on Speed Density with iWire's plug-and-play harness! What the Heck is Speed Density, and Why Did my Tuner Recommend it?Speed density quite simply is another way to estimate how much air is...

iWire Rear O2 Sensor Extension Harness Aftermarket downpipes often relocate the rear oxygen sensor farther away, leading to stress on both the harness and sensor that can result in failure. iWire's rear oxygen sensor extension lengthens the connection by...

-Compatible with unleaded and leaded race fuels.-Compatible with unleaded and leaded race fuels.-Replacement for 0300 with 0400 serial number-Improved durability compared to Bosch 4.9.-Faster response time.