PERRIN Pitch Stop Brace For 2015-21 Subaru WRX / STI - PSP-DRV-112BK

PITCH STOP BRACE

The OEM Subaru pitch stop brackets fail over time. Help prevent this failure with the PERRIN Pitch Stop Brace.

OVERVIEW

The Problem With The OEM Pitch Stop Brackets
Under normal driving conditions, the drivetrain is constantly moving back and forth. The OEM pitch stop brackets absorbed this movement and did not cause any problems until 2015-2021 year models were released. This normal movement of the drivetrain and weaker OEM brackets lead to failures shown in the graphics below. These failures come in the form of OEM brackets tearing, welds breaking off of the firewall, and sometimes a combination of the two.

The Need For The PERRIN PSB
The PERRIN Pitch Stop Brace does exactly what its name implies, it reinforces the brackets that connect the pitch stop to the car. Even under normal driving conditions, the brackets flex. The PERRIN Pitch Stop Brace acts as a means of helping to prevent damage and possible failure to your pitch stop brackets.

The PERRIN Pitch Stop Brace is intended to help prevent possible breakage and greatly reduce the chances of OEM pitch stop bracket failures and does not guarantee a complete fix for this issue. The PERRIN Pitch Stop Brace is not intended as a fix for failed pitch stop brackets. Failed pitch stop brackets should still be fixed professionally prior to installation of the PERRIN Pitch Stop Brace.

Clutch Line Replacement
Included in the PERRIN Pitch Stop Brace kit is a replacement stainless steel braided Teflon clutch line. Not only does this clean up your engine bay, but their unrestricted stainless steel braided clutch line provides a faster response, and more firm and consistent pedal feel.

Clutch Master Cylinder Brace
An added benefit of the PERRIN Pitch Stop Brace is that it not only comes with an upgraded clutch line, but also braces the clutch master cylinder, reducing firewall flex when depressing the clutch pedal. This is most noticeable on cars with stiffer aftermarket clutches.

Construction & Finish
The PERRIN Pitch Stop Brace body is CNC machined from 6061 billet aluminum and a black anodized finish with vibrant, laser engraved PERRIN logos.

IN THE BOX

• (1) PERRIN Pitch Stop Brace, Left
• (1) PERRIN Pitch Stop Brace, Right
• (1) Stainless steel braided Teflon clutch line
• (3) M6 Rivet nuts
• (1) M10 Hex bolt
• (1) M10 Hex nut
• (2) Extra thick SAE flat washers
• (1) M8 Socket cap screw
• (3) M6 Socket cap screws
• (1) Rivet nut tool
• (1) M8 Flat washer
• (3) M6 Fender washers
• (1) M6 Hex head bolt
• (4) Zip ties
• Warranty & Instructions