IAG V2 AOS Replacement O-Ring Seals and Hardware Set
IAG-RPL-7109
Low stock! Only 7 left
Regular price
$19.99
Sale price
$19.99
Regular price
Unit price
per
Shipping calculated at checkout.
FREE SHIPPING on most orders over $249 in US 48
Thank you. We'll let you know when it's back in stock.
Unable to save your request. Please try again.
Sorry, it's out of stock.
But we can let you know when it's back in.
Couldn't load pickup availability
Question about this product?
We're happy to help.
CA WARNING:
Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information go to
www.P65Warnings.ca.gov/motor-vehicle-parts.
The IAG V2 AOS replacement o-ring seals and hardware set is designed for those rebuilding an IAG Air Oil Separator. Included in the set are the main hardware and seals to rebuild the body/can of either the version 2 Street or Competition Series AOS.
Includes:
- (2) -340 Large Viton O-Rings (AOS Top / Bottom)
- (2) -014 Medium Viton O-Rings (AOS Coolant Block Top / Bottom)
- (2) -114 Medium Viton O-Rings (AOS Coolant Hoses)
- (1) -022 Medium / Large Viton O-Ring (AOS Breather)
- (2) -012 Small Viton O-Rings (AOS Coolant Block / Drain)
- (4) M6 x 10mm Socket Head Cap Screws (AOS Coolant Back Bracket)
- (6) M4 x 25mm Socket Head Cap Screw (AOS Coolant Blocks Top / Bottom)
- (9) M4 x 8mm Socket Head Cap Screw (AOS Breather / Drain / Back Bracket)
*Note (1) extra M4x8mm screw will be left over when rebuilding a Comp Series AOS.
Designed for use on part numbers:
- IAG-ENG-7150
- IAG-ENG-7151
- IAG-ENG-7152
- IAG-ENG-7250
- IAG-ENG-7251
- IAG-ENG-7252
*Not intended for use on V3 AOS.
Installation Instructions
Installation Instructions
Fitment
Fitment
B
Bought what I was told was a v3 AOS, emailed iag to get info on what I bought (used). They replied with the info I needed and sent a link to the rebuilt kit and the hose kit. I got the seals and cleaned up the AOS and replaced the seals. Now I have peace of mind knowing it's not going to leak etc. price was right and customer service is amazing.
H
Perfect
J
What grease would you recommend for the o-rings?
We recommend Super Lube Multipurpose Grease.
M
Getting ready to tear apart my V2 for powdercoating. Is there a PDF I can follow for the rebuild once I’m ready?
Unfortunately we do not have rebuild instructions. You can email us and we can give you a step-by-step. Sales@iagperformance.com