Knowledge Base:  
2015+ Subaru WRX Air Oil Separator - After Install Passenger Window Issue
Last Updated: 03/23/2018
If you leave the ECU/battery unplugged you may have to reset the switches.

If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated:
  • One-touch auto up/down function
  • Anti-entrapment function


Follow the steps below to reactivate functions:
1. Close the driver's door.

2. Turn the ignition switch to the "ON" position.

3. Open the driver's side window halfway by pushing down the power window switch.

4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely.



Was this article helpful?

Comments: