IAG Stage 3 Extreme FA20 DIT Subaru Closed Deck Short Block for 2015-18 WRX

IAG Stage 3 Extreme FA20 DIT Subaru Closed Deck Short Block for 2015-18 WRX
IAG Stage 3 Extreme FA20 Built Subaru Short Block


 
Alternative Views:


MSRP: $5,459.99
Our Price: $5,199.99
Savings: $260.00

Availability: Built in the Order Received
Part#: IAG-ENG-1313


Head Studs*:
IAG 1/2" ARP Head Stud Set Part# IAG-ENG-1700 [Add $499.99]
Not Required

Seal Kit*:
Oil Plug & Seal Kit PN# IAG-ENG-1721 [Add $36.99]
Not Required

Qty:  
Description Warranty Information Applications
 

IAG Stage 3 Extreme FA20 DIT Closed Deck Short Block


The IAG Stage 3 Extreme short block starts with new Subaru FA 2.0L engine case halves, IAG machines the case halves assembled together in our Haas VF-4SS CNC mill to accept the IAG CLOSED Deck Inserts that transform the block into a solid deck. The unique inserts feature small passages that allow needed coolant flow to the deck surface. The case halves are then CNC machined with O-ring receiver grooves around the bore surface as well as drilled and tapped to accept 1/2" head studs that greatly reduce head gasket failure during high cylinder pressure scenarios. Next, the short block is Deck Plate bored and honed that to 86.1mm on our in-house Sunnen SV-30 the most advanced automotive cylinder hone available. IAG‘s in-house honing process is able to set piston to wall clearances tighter for a quieter running engine. The short block is measured and assembled using a new 2015-18 Subaru 2.0L WRX crankshaft that is matched to King main bearings. Manley I-Beam rods with ARP2000 rod bolts are utilized along with King or ACL rod bearings. The case halves are sealed with new OEM case bolts and sealant. Finally, IAG-Spec 86.1mm forged pistons are spec'd and installed along with an OEM oil plug finishing off the short block.

Stage 3 Extreme FA20 Includes:
  • Case Halves - Converted to Closed Deck using brand new Subaru OEM case halves, bored and honed to 86.1mm
  • O-Ringing - Machine and O-Ring Deck Surface
  • Head Studs - Machine Case to 1/2" head studs - * Head studs are sold separately
  • Pistons - IAG-Spec 86.1mm Forged Pistons, Ring Set, and .150" x 2.250" Chromoly Wrist Pins.
  • Connecting Rods - Manley I-Beam / ARP2000 Rod Bolts
  • Rod - ACL or King XPG
  • Main Bearings - King XPG
  • Crankshaft - New Subaru FA20 DIT WRX crankshaft
  • Case / Main Bolts - Standard Subaru case bolts
  • Hardware - OEM Oil Plug - comes preinstalled at the oil pan location

Additional Options Available:
  • Oil Plugs & Rear Main Seal - (x1) 11021AA190 Plug, (x2) 11024AA141 Plugs , (x1) 806792010 Rear Main Seal - $36.99
  • Head Studs - IAG Performance 1/2" head stud set manufactured by ARP - $499.99


Compression Ratio:
  • 10.0:1 (.6 lower than stock compression) on standard gasket thickness.

Power: The IAG Stage 3 Extreme Short Block has a power output rating of 800BHP



*All IAG Short Blocks are balanced and blueprinted.




Please review the PDF document below regarding installation, break-in procedures and warranty information.

PDF After Sale Document - Contains Shipping, Engine Care and Warranty Information

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.



Share your knowledge of this product. Be the first to write a review »