IAG Stage 2 FA20 DIT Subaru Short Block for 2015-18 WRX

IAG Stage 2 FA20 DIT Subaru Short Block for 2015-18 WRX
IAG Stage 2 FA20 Built Subaru Short Block


 
Alternative Views:


MSRP: $3,884.99
Our Price: $3,699.99
Savings: $185.00

Availability: Usually Ships in 2 to 3 Weeks
Part#: IAG-ENG-1206


Seal Kit*:
Oil Plug & Seal Kit PN# IAG-ENG-1721 [Add $36.99]
Not Required

Qty:  
Description Warranty Information Applications
 

IAG Stage 2 FA20 DIT Short Block


The IAG Stage 2 short block starts with new Subaru FA 2.0L engine case halves that are machined for improved oiling. Then the case is bored and honed to 86.1mm on our in-house Sunnen SV-30 the most advanced automotive cylinder hone available. IAG‘s in-house honing process is able to set piston to wall clearances tighter for a quieter running engine. The short block is measured and assembled using a new 2015-18 Subaru 2.0L WRX crankshaft that is matched to King main bearings. Brian Crower H-Beam rods with ARP2000 rod bolts are utilized along with King or ACL rod bearings. The case halves are sealed with new OEM case bolts and sealant. Finally, IAG-Spec 86.1mm forged pistons are spec'd and installed along with an OEM oil plug finishing off the short block.

Stage 2 FA20 Includes:
  • Case Halves - Brand new OEM Subaru FA20 case halves, bored and honed to 86.1mm
  • Case Machining - Modified for improved oiling
  • Case Machining - Bored and honed to 86.1mm
  • Pistons - IAG-Spec 86.1mm Forged Pistons, Ring Set, and .150" x 2.250" Chromoly Wrist Pins.
  • Connecting Rods - Brian Crower H-Beam / ARP2000 Rod Bolts
  • Rod - ACL or King XPG
  • Main Bearings - King XPG
  • Crankshaft - New Subaru FA20 DIT WRX crankshaft
  • Case / Main Bolts - Standard Subaru case bolts
  • Hardware - OEM Oil Plug - comes preinstalled at the oil pan location

Additional Options Available:
  • Oil Plugs & Rear Main Seal - (x1) 11021AA190 Plug, (x2) 11024AA141 Plugs , (x1) 806792010 Rear Main Seal - $36.99


Compression Ratio:
  • 10.0:1 (.6 lower than stock compression) on standard gasket thickness.

Power: The IAG Stage 2 Short Block has a power output rating of 600BHP

*All IAG Short Blocks are balanced and blueprinted.




Please review the PDF document below regarding installation, break-in procedures and warranty information.

PDF After Sale Document - Contains Shipping, Engine Care and Warranty Information

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.



Share your knowledge of this product. Be the first to write a review »