IAG Stage 2.5 FA20 Subaru Closed Deck Short Block for 2013-18 BRZ / FR-S (10.5:1 Compression Ratio)

IAG Stage 2.5 FA20 Subaru Closed Deck Short Block for 2013-18 BRZ / FR-S (10.5:1 Compression Ratio)
IAG Stage 2.5 FA20 Built Subaru Short Block


 
Alternative Views:


MSRP: $4,934.99
Our Price: $4,699.99
Savings: $235.00

Availability: Usually Ships in 3 to 4 Weeks
Part#: IAG-ENG-1256


Seal Kit*:
Oil Plug & Seal Kit PN# IAG-ENG-1722 [Add $34.99]
Not Required

Qty:  
Description Warranty Information Applications
 

IAG Stage 2.5 FA20 Closed Deck Short Block


The IAG Stage 2.5 short block starts with new Subaru FA 2.0L BRZ engine case halves that are machined for improved oiling. Then IAG machines the case halves assembled together in our Haas VF-4SS CNC mill to accept the IAG CLOSED Deck Inserts that transform the block into a solid deck. The unique inserts feature small passages that allow needed coolant flow to the deck surface. Next, the short block is Deck Plate bored and honed that to 86.25mm on our in-house Sunnen SV-30 the most advanced automotive cylinder hone available. IAG‘s in-house honing process is able to set piston to wall clearances tighter for a quieter running engine. The modified case halves are then measured and assembled using a new FA20 WRX / BRZ Subaru crankshaft that is matched to King main bearings. Brian Crower H-Beam rods with ARP2000 rod bolts are utilized along with King or ACL rod bearings. The case halves are sealed with new OEM case bolts and sealant. Finally, lower compression IAG-Spec 86.25mm 10.5:1 compression ratio forged pistons are spec'd and installed along with an OEM oil plug finishing off the short block. The lower compression ratio is good for BRZ / FR-S forced induction conversion applications.

Stage 2.5 FA20 Includes:
  • Case Halves - Converted to Closed Deck using brand new Subaru OEM case halves
  • Case Machining - Modified for improved oiling
  • Case Machining - Bored and honed to 86.25mm
  • Pistons - IAG-Spec 86.25mm 10.5:1 Forged Pistons, Ring Set, and 1.50" x 2.250" Chromoly Wrist Pins
  • Connecting Rods - Brian Crower H-Beam / ARP2000 Rod Bolts
  • Rod Bearings - ACL or KING XPG
  • Main Bearings - King XPG
  • Crankshaft - New Subaru FA20 WRX / BRZ crankshaft
  • Case / Main Bolts - Standard Subaru case bolts
  • Hardware - OEM Oil Plug - preinstalled at the oil pan location.

Additional Options Available:
  • Oil Plugs & Rear Main Seal - (x2) 11024AA141 Plug, (x1) 806792010 Rear Main Seal - $34.99


Compression Ratio:
  • 10.5:1 (2.0 lower than stock compression) on standard gasket thickness.


Power: The Stage 2.5 Short Block has a power output rating of 675BHP



*All IAG Short Blocks are balanced and blueprinted. This short block features a lower compression and is intended for forced induction applications.


Please review the PDF document below regarding installation, break-in procedures and warranty information.

PDF After Sale Document - Contains Shipping, Engine Care and Warranty Information

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.



Share your knowledge of this product. Be the first to write a review »