IAG Cooper Ring Head Gasket for Subaru EJ25 / EJ257, 100mm, .051", For 1/2" and 11mm Head Studs (1)

IAG Cooper Ring Head Gasket for EJ25 / EJ257, 100mm, .051in, For 1/2" and 11mm Head Studs (1)


 
MSRP: $104.99
Our Price: $99.99
Savings: $5.00


Availability: Usually Ships in 24 to 72 Hours
Part#: IAG-ENG-1731S
Qty:

Description Applications
 
The IAG Performance Cooper ring head gasket is manufactured from an asbestos-free composite raw material and features silicone based beading applied to critical areas to improve sealing around all water and oil passages. What sets this gasket apart from others is the separate stainless steel rings surrounding the bore holes. The rings assure maximum sealing for a turbocharged engine and the block and head do not require any special machining. The IAG Cooper ring gaskets are designed for high horsepower, high boost applications. The gaskets are not recommended for blocks or heads that are o-ringed. The gaskets are sold individually.

Features:
  • Composite Material
  • Stainless Steel Ring (AISI304)
  • Silicone Beading
  • 100mm Bore
  • .051" Thickness
  • Intended for High Horsepower, High Boost applications
  • Use with 11mm and 1/2" head studs only
  • Gaskets Sold Individually

Install Notes:
  • Groove side of the ring faces up toward the head
  • If a block or cylinder head was previously o-ringed the groove must be filled and resurfaced before using this type of gasket.
  • Do not use coatings or sprays on the gaskets
  • Do not use with 14mm head studs



WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Share your knowledge of this product. Be the first to write a review »