COBB Tuning Adjustable Rear Antiswaybar Endlinks are threaded to easily remove all preload from the bar and provides consistent handling balance in right and left turns. The construction of these endlinks start with carbon steel bearing rod ends utilizing a PTFE (Polytetrafluoroethylene) self lubricating corrosion resistant coating. The CAD designed and CNC machined spindles are 6061-T6 aluminum and hard anodized for a long lasting finish. Our endlinks were designed and assembled in-house for optimal strength, performance and durability. Adjustment is as easy as loosening the jamb nuts and turning the spindle to lengthen or shorten the endlink while installed on the car.

COBB Tuning Sport Lowering Springs for 2008-12 Subaru WRX / STi. The COBB Sport Spring Set enhances handling with a lower center of gravity. COBB Tuning Sport Springs reduce the ride height by 7/8" in the front and 7/8" in the rear resulting in improved cornering speed, response, reduced wheel gap, reduced squat and wheel hop. The progressive rate springs measure 266 lbs/in front and 215 lbs/in in the rear providing a sport feel that is not harsh or bouncy.

ACT Clutch kit includes: Heavy Duty Pressure Plate, Performance 4 Puck Disc (Sprung), Release Bearing, and Alignment Tool. Torque Capacity: 537 Ft/Lbs. Clamp Load Increase: 32%. * Will not work with stock Legacy GT Flywheel. 2005-2007 Subaru Legacy GT 5-speed transmission only works with ACT flywheel or stock 06-07 WRX flywheel. Product may vary from photo.

ACT Clutch kit includes: Heavy Duty Pressure Plate, Performance 6 Puck Disc (Sprung), Release Bearing, and Alignment Tool. Torque Capacity: 537 lbs. Clamp Load Increase: 32%. Product pictured may vary from actual product shipped. * Will not work with stock Legacy GT Flywheel. 2005-2007 Subaru Legacy GT 5-speed transmission only work with ACT flywheel or stock 06-07 WRX flywheel.

Clutch kit includes: Heavy Duty Pressure Plate, Performance 4 Puck Racing Disc (Solid), Release Bearing, and Alignment Tool. Torque Capacity: 537 Ft/Lbs. Clamp Load Increase: 32%. * Will not work with stock Legacy GT Flywheel. 2005-2007 Subaru Legacy GT 5-speed transmission only works with ACT flywheel or stock 06-07 WRX flywheel. Picture shown may vary from actual product.

ACT Clutch kit includes: Heavy Duty Pressure Plate, Performance 6 Puck Racing Disc (Solid), Release Bearing, and Alignment Tool. Clamp Load Increase: 32%. Torque Capacity: 537 lbs. * Will not work with stock Legacy GT Flywheel. 2005-2007 Subaru Legacy GT 5-speed transmission only works with ACT flywheel or stock 06-07 WRX flywheel. Product may vary from picture shown.

ACT Clutch Kit includes: Heavy Duty Pressure Plate, Street Disc, Release Bearing, Pilot Bearing, Alignment Tool. Torque Capacity: 420 ft/lbs. Clamp Load Increase 32%. Picture shown may vary from actual product. * Will not work with stock Legacy GT Flywheel. 2005-2007 Subaru Legacy GT 5-speed transmission only works with ACT flywheel or stock 06-07 WRX flywheel.

Agency Power has developed these rear double adjustable control arms for the 2008 and up Subaru WRX or STI. The rear control arms fit both the GH (wagon) and GE (sedan) chassis. The rear arm is all 6061 CNC machined aluminum. To improve strength and rigidity, Agency Power has increased the thickness where the shock and sway bar link mount. The factory stamped steel component has very thin walls and flexes under serious racing conditions. In addition to the beefy aluminum component, Agency Power uses a double adjustable setup which mounts to the car. The spherical rod end is a 3 piece design with Teflon lining. Agency Power has used these for years on other control arms with zero failure rates. In between the rod end and the aluminum part features a steel turnbuckle for on car adjustment at the track.

COBB AccessPort for 2007 - 10 Subaru Legacy GT/Spec B, 2008-13 Impreza WRX, 2008-13 STI & 2007 - 13 Forester XT. The ultimate personal tuning solution! Reprogram your vehicle's computer (ECU) by selecting one of the pre-installed performance "maps" that automatically optimize settings such as the air/fuel ratio, ignition timing, boost and more for performance results you can instantly feel!

Replace your ugly OEM plastic coolant overflow tank with a sleek one from PERRIN! The kit includes a powdercoated coolant tank as well as various mounting brackets that allow you to install the tank virtually anywhere. Our new coolant tank holds more coolant than our previous design AND uses your OEM tank cap for a great seal! It adds clearance for aftermarket intercooler piping and a great compliment to kits that don't include them. Available in powder coated black to compliment any engine bay. Universally designed to work with nearly all coolant systems.

Perrin Oil Catch Can / Coolant Overflow Tank.

Ate Super Gold DOT 4 Brake Fluid (1) Liter Container

Ate Super Blue DOT 4 Brake Fluid, (1) liter container High performance brake fluid for coping with extreme demands posed by motor racing. Thanks to its outstanding wet boiling point, it has highest safety reserves. It is used in motor racing by leading car makers. Dry boiling point: 280' C (536' F) Wet boiling point: 198' C (388' F) Better than specifications of FMVSS No. 571.116/ DOT4/DOT3, (except blue color) SAE J1703 and ISO 4925. Suitable for all brake and clutch systems rated for DOT brake fluids, and naturally suitable for ABS. Mixes with brake fluids that have the same specifications and DOT 5.1. Change your fluid every 2-3 years (depending upon vehicle and operational conditions)

ROTA BOOST 17X8 / 48MM OFFSET / 5X100 / 56.1HB / FLAT BLACK W/ RED LIP WHEEL SET (4). * Will not fit 2005 STI with 5x114.3 lug pattern.

Braided stainless steel turbo oil feed line for Subaru WRX applications using a BPT ball bearing turbocharger. This line is also used for the Subaru STi 2007 model year only with BPT ball bearing turbochargers.