Autometer Dual Overhead 52MM Gauge Pod for 2008-10 Subaru WRX / STi

Injector Dynamics 2000cc/min Top Feed Subaru Fuel Injector Set. Fits 2002-11 Subaru WRX, 2007-11 STi, 07-11 Legacy GT. Includes Clips and pins that require crimping. *These injectors are NOT compatible with gasolines containing MTBE, specifically VP Q16 and VP Import

Cosworth Forged Connecting Rods are manufactured from high strength 4340 steel (a proprietary forging made in the USA) and machined to precise tolerances. The rods feature detailed machined work to maintain optimum weight and strength. The solid beam design is for high power applications; "Radial Truss" small end is for superior strength and reduced reciprocating mass. Rods include genuine Cosworth H11 tool steel rod bolts (260,000psi). Packaging with detailed data card.

Cosworth 99.75mm 8.2:1 Compression Ratio Forged Piston Set For 2.5L Subaru Turbo including 2006-12 WRX & 2004-12 STi. All Cosworth forged pistons are manufactured utilizing the same methods as their Formula One pistons and feature: friction reducing skirt coating, ultra strong pins, polished tops and patented anti-detonation bands. Each application uses a unique forging to minimize weight and ensure the strongest possible piston design.

The AEM cold air intake for 08-13 Subaru WRX / STi is a great way to get a cooler & denser air charge into your engine. This intake system produces estimated gains of 36 hp. AEM has designed this intake to retain the stock diameter MAF housing and features a built in air straightener to ensure the MAF sensor readings are accurate & will not cause a check engine light. This intake features a 9 inch dryflow air filter to ensure the MAF sensor does not get gummed up which is common with oiled filters. The included heat shield ensures the intake will be inducting a nice cool air charge drawn from the fender.

COBB Shifter Bushings for 5 Speed Manual Subaru Transmissions. This popular item is designed to replace the soft rubber bushing found at the anchor point of your shifter assembly. This upgraded bushing greatly improves the feel of the shifter by eliminating that spongy feel you get when changing gears. Easy to install with simple hand tools. Highly recommended when using the COBB Short Throw Shifter.

The popular COBB Subaru Rear Shifter Stay Bushing kit is the final piece of the puzzle to eliminating excessive shifter compliance in the factory setup. The Rear Shifter Stay Bushing is a direct replacement for the soft rubber bushing found at the back of the shifter assembly. This upgraded bushing greatly improves the feel of the shifter by reducing side-to-side and front-to-back compliance (slop) found in the stock shifter mechanism caused by soft rubber bushings. This bushing is made from 85A durometer urethane and comes with everything needed for an easy installation with simple hand tools. Works on both 5-speed and 6-speed Subaru manual transmissions.

COBB Tuning announces the immediate availability of the COBB Shift Knob, available for Subaru STi, WRX and RS models. The knob is a fusion of the highest quality materials that, when properly mated, produce a shift knob that feels as good as it looks. Fits Subaru Impreza WRX & RS 2002-10 ; 5 Speed

EVO Series 52mm (2 1/16") Wideband Air Fuel Ratio Gauge. This one gauge will display Red or Blue and is dimmable! Includes 0-5 volt output signal for data-logging. Utilizing the latest Bosch wideband O2 sensor -5 wire heated LSU 4.9 (Prosport Inc. is the only one in the USA to use them) our gauge now has the widest range 10.0:1 to 20.0:1 AFR readings on the planet.

If your vehicle is supercharged or turbocharged then this gauge is simply a must have. For peak performance you need to know how much boost you are making at maximum RPM's. Now you can accurately monitor your boost as you modify your ride! This Electric Boost Gauge will perform a digital sweep, on Start-up. (-30vac to 35 PSI includes Mounting hardware, Tubing Kit, T-Adaptor, Electrical sender, and Instructions)

With a 270° dial sweep, now you can easily learn the Exaust temperature & how your modifications will affect the engine performance. With this gauge you can now tune your vehicle for peak performance. (400-2400° F includes: K type Probe/Sender, Mounting Hardware, Decals and Instructions) Note: EGT Probe harness is 6' long with 1/8"NPT thread pitch.

Prosport EVO Series 52 mm (2 1/16") Electrical Digital Volt Gauge. Monitor your engine functions with one quick glance and notice any problems before your vehicle leaves you stranded. Don't wait for your factory battery light to come on, once that happens you'll be walking home! Don't ignore your electrical system, if you have a system, gauges, turbo timers, etc.. you want to keep on eye on your voltage.

With a 270° dial face and utilizing only top grade sending units these full sweep Digital electric gauges are durable, reliable, safe & easy to install. Monitor your engine temperature with more precision. Keep hazardous fluids out of the passenger compartment. (80°-280°F includes 1/8" NPT Sender, Mounting hardware, Decals and Instructions) Details: Temp Sender is only 1" long with 1/8" NPT threads

Utilizing the latest Bosch wideband O2 sensor -5 wire heated LSU 4.9 our gauge now has the widest range 10.0:1 to 20.0:1 AFR readings on the planet. Enjoy 6 stages of dimming for both day and night operation modes. Amber/White/Blue display-Blacked out when off. This is a complete kit that includes everything you need: AFR Halo Series Gauge, Bosch 4.9 5 wire heated O2 sensor, Weld in Bung, Wiring harness(Gauge to O2 sensor) 10 feet long, Instructions, Visor/hood, Mounting Cup.

This Halo Electrical Boost Gauge will perform a pointer sweep/self check on start-up & shut down! Now you can track your peak boost as you modify your ride! Save your Turbo-Set the warning function to alert you when you over boost!! Set the warning level anywhere you like and if you exceed it the gauge will beep , flash or both. Enjoy 6 stages of dimming on both day and night operation modes. (-30~30 PSI includes Mounting Cup, Tubing kit, T-Adaptor, Electric Sender, quick connect pigtail wiring, Visor, Decal and Instructions) *This Halo Boost gauge is adjustable for altitude compensation*