IAG Performance - Subaru Performance Parts & Service. IAG Home - www.iagperformance.com
0 Items: $0.00
TAKATA Bolt In Harness Bracket (B24)
The B24 is the most economical bolt-in bracket offered. It is a heavy-duty Steel bracket that cannot be bent to aid installation. Dimensions are 5mm thick, 69x46mm with a 13mm (1/2") bolt hole. There is a slight 10° bend so that this bracket can be bolted directly to a flat surface and leave room for webbing wrapped into it. It can be sewn in, or wrapped with an LV4 (recommended), LV10 or LV11. FIA and SFI 16.1/16.5 approved. Cannot be used for a Lap Belt bolt-in bracket under SFI 16.5. 3" webbing must be folded at the edges for use with this bracket.
TAKATA Drift III "Bolt-On" Street Oriented 4 Point Harness in Green
TAKATA Drift II "Snap-On" Street Oriented 4 Point Harness in Green
TAKATA 2" Shoulder Belt Pads in Green
TAKATA Race 4 "Bolt-On" Track Day / Drift / Show 4 Point Harness in Green
TAKATA 2" Shoulder Belt Pads in Black
Share your knowledge of this product.
Be the first to write a review »
Stay Connected with IAG
Terms & Conditions
1203 Baltimore Blvd.
Westminster, MD 21157
Integrity Auto Group Inc.