IAG Performance - Subaru Performance Parts & Service. IAG Home - www.iagperformance.com
0 Items: $0.00
MOTUL 8100 0W20 Eco-Lite 100% Synthetic Motor Oil 5L
Motul's 8100 0W20 Eco-Lite 5L is a 100% synthetic lubricant based on Ester-Technology. Designed a fuel economy lubricant with low viscosity for the latest generation of gasoline engines. The oil meets API SM/CF standards.
"Fuel economy" engine oil specially designed for recent cars, powered with gasoline engines, designed to use oil with low friction, very low HTHS viscosity (≥ 2.6 mPa.s) and "Mid SAPS" reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%). Catalytic converter friendly.
These oils may be unsuitable for use in some engines. Refer to the owner manual or handbook if in doubt.
STANDARDS API SM / CF
RECOMMENDATIONS HONDA Europe gasoline engines
MAZDA gasoline engines
SUBARU SOHC (single overhead camshaft) engines
The API SM standard is fully backward compatible over API SL requirements and all former API standards.
API SM lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature during the whole oil life span.
Viscosity grade SAE 0W-20 minimizes oil hydrodynamic friction, allows fuel economy especially when oil is cold.
Improves oil flow at start up, faster oil pressure build up, faster rev raisings and reach operating temperature faster.
Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions.
Drain interval: according to manufacturers’ recommendations and tune to your own use. Can be mixed with synthetic or mineral oils.
Viscosity grade: SAE J 300 / 0W-20
Density at 20°C (68°F): ASTM D1298 / 0.838
Viscosity at 40°C (104°F): ASTM D445 / 48.6 mm²/s
Viscosity at 100°C (212°F): ASTM D445 / 8.8 mm²/s
HTHS viscosity at 150°C (302°F): ASTM D4741 / 2.7 mPa.s
Viscosity index: ASTM D2270 / 162
Pour point: ASTM D97 < -50°C / < -58°F
Flash point: ASTM D92 238°C / 460.4°F
Sulfated ash: ASTM D874 / 0.8% weight
TBN: ASTM D2896 / 8.4 mg KOH/g
MOTUL 8100 5W40 X-cess 100% Synthetic Motor Oil 5L
MOTUL 8100 5W40 X-cess 100% Synthetic Motor Oil 1L
IAG MOTUL Engine Break-In Oil Change Service Package For 2002-14 Subaru WRX, 2004-16 STI
MOTUL 8100 5W30 Eco-nergy 100% Synthetic Motor Oil 1L
MOTUL 8100 5W30 Eco-nergy 100% Synthetic Motor Oil 5L
Share your knowledge of this product.
Be the first to write a review »
Stay Connected with IAG
Terms & Conditions
1203 Baltimore Blvd.
Westminster, MD 21157
Integrity Auto Group Inc.